Siemens SINAMICS G150 Operating Instructions Manual page 393

Converter cabinet units 75 kw to 1500 kw

Hide thumbs Also See for SINAMICS G150:

Table of Contents

Function diagram

Converter cabinet units

Operating Instructions, 03/2012, A5E03263466A

Interface to Motor Module (ASM), p0300 = 1)

Interface to Motor Module (PEM), p0300 = 2)

Rated motor current

Motor magnetizing current/short-circuit current

Saturation characteristic flux 1

Saturation characteristic flux 4

Saturation characteristic I_mag 1

Saturation characteristic I_mag 4

Magnet angle. Decoupling (cross saturation) coefficient 1

Magnet angle. Decoupling (cross saturation) coefficient 3

Technology application

Calculating technology/unit-dependent parameters

Pulse technique pattern configuration

CO: Actual pulse technique pattern

Pulse technique stimulus

CO: Pulse technique answer

Torque setpoint static (SLVC)

Supplementary accelerating torque (SLVC)

Motor model configuration

Motor model changeover speed encoderless operation

Motor model changeover speed hysteresis

Motor model changeover delay time, closed/open-loop control

Motor model changeover delay time open/closed loop control

Motor model deviation component 1 - deviation model 2

Motor model pulse technique speed adaptation Kp

Modulator configuration - current measurement oversampling activated (for

pulse technique PEM)

Setpoint channel and closed-loop control

7.4 Vector speed/torque control with/without encoder