Command Sources; "Profidrive" Default Setting - Siemens SINAMICS S150 NEMA Operating Instructions Manual

Operation

6.4 Command sources

6.4 Command sources
6.4.1

"PROFIdrive" default setting

Requirements
The "PROFIdrive" default setting was chosen during commissioning:
• STARTER (p0700):
• AOP30 (p0700):
Command sources
Figure 6-9
Priority
The command source priorities are shown in the diagram "Command sources - AOP30 <->
PROFIdrive".
Note
Emergency OFF signals
The emergency OFF and motor protection signals are always active (regardless of the
command source).
All supplementary setpoints are deactivated for LOCAL master control.
282
"PROFIdrive"
"5: PROFIdrive"
Command sources – AOP30 <--> PROFIdrive
Operating Instructions, 12/2018, A5E36652151A
Enclosed Drives