Connection Examples - Siemens SINAMICS G150 Operating Instructions Manual

Electrical installation
4.11 Other connections
NOTICE
The KTY temperature sensor must be connected with the correct polarity.
If the polarity is reversed, the sensor will not be able to detect if the motor overheats.
4.11.22.3

Connection examples

Connection example 1: HTL encoder, bipolar, without zero marker -> p0405 = 9 (hex)
Figure 4-41 Connection example 1: HTL encoder, bipolar, without zero marker
Connection example 2: TTL encoder, unipolar, without zero marker -> p0405 = A (hex)
Figure 4-42
172
Connection example 2: TTL encoder, unipolar, without zero marker
Converter cabinet units
Operating Instructions, 03/2012, A5E03263466A