Deactivating Know-How Protection; Changing The Know-How Protection Password - Siemens SINAMICS G150 Operating Instructions Manual

Functions, Monitoring, and Protective Functions
9.2 Drive Functions
9.2.20.3

Deactivating know-how protection

Know-how protection can be deactivated via STARTER in the online mode.
Deactivating know-how protection
Know-how protection is deactivated via STARTER in the online mode as follows:
● Select the drive unit via Project > Know-how protection drive unit > Deactivate.
● A dialog appears in which the know-how protection can be temporarily or permanently
Note when deactivating know-how protection
Note
Permanently or temporarily deactivating know-how protection
Temporary deactivation means that know-how protection is active again after a POWER ON.
Data is still saved on the memory card in an encrypted form. The existing password is used
to reactivate know-how protection.
Final deactivation means that know-how protection is no longer active, even after a POWER
ON. Data is saved on the memory card in an unencrypted form (i.e. data is no longer
encrypted).
Even if know-how protection has been finally deactivated, it can still be reactivated when
required.
9.2.20.4

Changing the know-how protection password

Changing the password for know-how protection can be realized via STARTER in the online
mode.
Changing the password
The password for know-how protection can be changed as follows via STARTER in the
online mode:
● Select the drive unit via Project > Know-how protection drive unit > Change password.
474
deactivated:
– Temporary deactivation:
Select temporary and enter the password, accept using OK.
– Final deactivation:
Select final and enter the password, select Copy RAM to ROM and accept using OK.
Converter cabinet units
Operating Instructions, 03/2012, A5E03263466A