Siemens SINAMICS G150 Operating Instructions Manual page 6

Foreword
The individual documentation describes precisely one customized cabinet unit and contains
the following:
● Dimension drawing
● Layout diagram
● Circuit diagram
with the equipment and location codes, their interconnections and the customer
interfaces.
● Terminal diagram
The terminal diagram shows all the customer terminals in the ordered cabinet unit, and
the associated internal wiring in the cabinet unit. This diagram documents the line-side
target wiring.
● Spare parts list
All of the available spare parts for the ordered cabinet units are listed in the spare parts
list with the equipment and the location codes.
● Additional operating instructions
The instructions for OEM components installed in the ordered cabinet unit are supplied as
OEM documentation.
Documentation in the Internet
The documentation for SINAMICS G150 can be found on the Internet at:
http://support.automation.siemens.com/WW/view/en/11735760/133300
Technical support
Phone
Fax
Internet
Phone
Fax
Internet
Phone
Fax
Internet
4
The dimension drawing documents the dimensions of the ordered cabinet unit.
The components installed in the ordered cabinet units are shown in the layout diagram
with the equipment and location codes.
The circuit diagram shows the electrical components installed in the ordered cabinet unit
+49 (0) 911 895 7222
+49 (0) 911 895 7223
http://www.siemens.com/automation/support-request
+1 423 262 2522
+1 423 262 2200
techsupport.sea@siemens.com
+86 1064 757 575
+86 1064 747 474
support.asia.automation@siemens.com
Time zone Europe/Africa
Time zone America
Time zone Asia/Pacific
Operating Instructions, 03/2012, A5E03263466A
Converter cabinet units