Control Via The Operator Panel; Operator Panel (Aop30) Overview And Menu Structure - Siemens SINAMICS G150 Operating Instructions Manual

Operation

6.6 Control via the operator panel

Note
Other fixed speed setpoints are available using p1004 to p1015. They can be selected using
p1020 to p1023.
6.6 Control via the operator panel
6.6.1

Operator panel (AOP30) overview and menu structure

Description
The operator panel can be used for the following activities:
● Parameterization (commissioning)
● Monitoring status variables
● Controlling the drive
● Diagnosing faults and alarms
All the functions can be accessed via a menu.
Your starting point is the main menu, which you can always call up using the yellow MENU
key:
Note
AOP reset
If the AOP no longer reacts, you can trigger an AOP reset by simultaneously pressing the
key and OFF buttons (longer than two seconds) and then releasing the OFF button.
288
Dialog screen for the main menu:
It can be accessed at any time with the
"MENU" key.
Press "F2" or "F3" to navigate through the
menu options in the main menu.
Operating Instructions, 03/2012, A5E03263466A
Converter cabinet units