Device Overview
2.3 Design
2.3.1
Version A
All the required power supply connection components, such as the main circuit breaker,
circuit breakers, main contactor, line fuses, radio interference suppression filter, motor
components, and additional protection and monitoring devices, can be installed as required.
The cabinet unit comprises up to two cabinet panels with a total width of between 800 and
1600 mm, depending on the output, and 3200 mm for units connected in parallel.
Figure 2-1
24
Example of the cabinet drive, version A (e.g., 132 kW, 400 V 3 AC) (layout and
components shown may vary according to version)
Converter cabinet units
Operating Instructions, 03/2012, A5E03263466A