Siemens SINAMICS G150 Operating Instructions Manual page 225

Entering the encoder data (option K50)
Note
If you have specified option K50 (SMC30 Sensor Module), the following screen is displayed
in which you can enter the encoder data.
Figure 5-23
⇒ In the Encoder name: field, enter a name of your choice.
Note
The delivery condition is a bipolar HTL encoder with 1024 pulses per revolution at terminal
X521/X531.
⇒ To select a different predefined encoder configuration, check the Select standard encoder
from list radio button and select one of the encoders from the list.
Converter cabinet units
Operating Instructions, 03/2012, A5E03263466A
Entering the encoder data
5.3 Procedure for commissioning via STARTER
Commissioning
223