Siemens SINAMICS G150 Operating Instructions Manual page 37

Explanation of the option short codes
Table 2- 2 Explanation of the option short codes
Input options
L00 Line filter for use in the first environment to EN 61800-3, category C2 (TN/TT
systems with grounded neutral point)
L01 Clean Power version with integrated Line Harmonics Filter compact
L13 Main contactor
L21 Operation in an IT system
L22 Line reactor not included in scope of delivery
L23 Line reactor uk = 2%
L26 Main circuit breaker (incl. fuses/circuit breakers)
Output options
L07 dV/dt filter compact plus Voltage Peak Limiter
L08 Motor reactor
L10 dV/dt filter plus Voltage Peak Limiter
L15 Sine-wave filter (only for 3 AC 380 ...480 V up to 250 kW and for 3 AC 500 ...
600 V up to 132 kW)
Input and output options
M70 EMC shield bus
Motor protection and safety functions
L45 EMERGENCY OFF pushbutton installed in the cabinet door
L57 EMERGENCY OFF category 0, 230 V AC or 24 V DC
L59 EMERGENCY STOP category 1, 230 V AC
L60 EMERGENCY STOP category 1, 24 V AC
L83 Thermistor motor protection unit (alarm)
L84 Thermistor motor protection unit (shutdown)
L86 PT100 evaluation unit
L87 Insulation monitoring
M60 Additional shock protection
Increase in degree of protection
M21 Degree of protection IP21
M23 Degree of protection IP23
M43 Degree of protection IP43
M54 Degree of protection IP54
Mechanical options
M06 Base 100 mm high, RAL 7022
M07 Cable compartment 200 mm high, RAL 7035
M13 Line connection from above
M78 Motor connection from above
M90 Crane transport assembly (top-mounted)
Converter cabinet units
Operating Instructions, 03/2012, A5E03263466A
Device Overview
2.5 Type plate
Version Version
A C
✓ −
✓ -
✓ −
✓ −
✓ ✓
✓ ✓
✓ −
✓ −
✓ −
✓ −
✓ −
✓ ✓
✓ −
✓ −
✓ −
✓ −
✓ −
✓ −
✓ −
✓ −
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ −
✓ −
✓ ✓
35