Mounting
1. Attach the sealing strip to the cabinet frames of the cabinets to be connected.
2. Push the cabinets together, they must completely come together at the front and the rear
3. Mount the cabinet connectors at the outside and inside corresponding to the following
4. If necessary, reattach the protective covers and doors. The ground connections must also
Figure 3-11
Positions of the cabinet connectors
Converter cabinet units
Operating Instructions, 03/2012, A5E03263466A
sides. The distance between the cabinets must be approximately 3 mm.
drawing.
be attached to the doors.
Mechanical installation
3.3 Assembly
53