Address Table Commands; Mac-Address-Table Aging-Time; Table 89: Address Table Commands - Edge-Core ECS2100-10T Reference Manual

17
mac-address-table
aging-time

Address Table Commands

These commands are used to configure the address table for filtering specified
addresses, displaying current entries, clearing the table, or setting the aging time.

Table 89: Address Table Commands

Command Function
mac-address-table Sets the aging time of the address table
aging-time
mac-address-table static Maps a static address to a port in a VLAN
clear collision-mac- Removes all entries from the collision MAC address
address-table table
clear mac-address-table Removes any learned entries from the forwarding
dynamic database
show collision-mac- Shows a shows a list of MAC addresses that cannot
address-table be learned by the switch due to hash collisions
show mac-address-table Displays entries in the bridge-forwarding database PE
show mac-address-table Shows the aging time for the address table
aging-time
show mac-address-table Shows the number of MAC addresses used and the
count number of available MAC addresses
This command sets the aging time for entries in the address table. Use the no form
to restore the default aging time.
Syntax
mac-address-table aging-time seconds
no mac-address-table aging-time
seconds - Aging time. (Range: 6-7200 seconds; 0 to disable aging)
Default Setting
300 seconds
Command Mode
Global Configuration
Command Usage
The aging time is used to age out dynamically learned forwarding information.
– 423 –
Mode
GC
GC
PE
PE
PE
PE
PE