Removing Air Compressor; Inspecting Drive Belt - TOHATSU TLDI 40 Service Manual

Removing Air Compressor

Remove the following components.
q Detach the oil pipe on the compressor side.
w Detach recirculation pipe on the compressor side.
e Detach cooling water pipe on compressor side.
r Remove air hose on compressor side.
t Compressor bolts: at 3 locations
Remove the following components.
y Air compressor
The air compressor is held in place by two knock
pins, these should be removed with a gentle tilting
motion.
u Drive belt
Be sure to apply markings that identify the top and
bottom sides in cases when the drive belt is being
reused.

Inspecting Drive Belt

• Check for wear and damage.
• Check for missing teeth.
• Check for presence of oil.
Replace in cases where even the slightest defect
is found.
e
r
4-11
q
t
u
y
w