Using The Installation Wizard - AGFA Drystar 5500 Reference Manual

72 | Drystar 5500, Drystar 5503 | Advanced Operation (key-operator mode)

Using the installation wizard

When you install the printer, the installation wizard will guide you through
the complete installation procedure.
Related Links
Changing the configuration settings
Topics:
• Starting the Installation wizard
• Entering the printer network settings
• Entering modality-specific settings
• Saving the configuration
Starting the Installation wizard
1. Press the Key-operator key to enter the Key-operator mode.
2. On the Key-operator main menu, press the Down key seven times,
followed by the Confirm key to select 'Installation'.
The 'Installation' screen will be displayed:
3. Press the Down key once, followed by the Confirm key to select 'Printer
instal wizard'.
The 'Select language' screen is displayed:
2900J EN 20180320 1448
Note: In case the display software has been updated (e.g. when
installing language files), the 'Updating display software' screen
is displayed during the downloading of the display software:
Note: Although the Installation wizard consists of three separate
steps, these steps cannot be performed separately
on page 22