Available Software Versions - AGFA Crystal-M Imager User Manual

10 | Crystal-M Imager | Crystal-M Imager

Available Software versions

The table below lists the available software versions and the type of printer
they require:
Software
version
(SW)
1.60
2.0
2.1 and 2.2
2.3
3.x
3.1
3.1.1
4.0
5.0
5.1
6.0
6.1
6.1.x
6.2
6.2.1
6.2.2
3852B EN 20210601 1655
Printer
Drystar AXYS (RoHS compatible)
supports both Drystar 5302 & Drystar AXYS
support new PCBs on Drystar 5302 & Drystar Axys
maintenance software version
supporting first Private label printer
maintenance software version
patch solving Dicom attribute issue
support of additional printer models
• support for single tray models
• Supports Sata Dom
• Supports Spare-Parts without E-lables
support of additional printer models
required for devices with serial number higher than 100000
is a maintenance software + supports DRY IMAGER
maintenance software
is needed for new Devnix PCB index 16 and higher
maintenance software
required for for devices with serial numbers higher than
751001 and for devices with serial numbers higher than
151001 and lower than 700000