Config Authen Application - D-Link DGS-3000 Series Reference Manual

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
DGS-3000-26TC:admin#show authen_enable method_list_name enable_list_1
Command: show authen_enable method_list_name enable_list_1
Method List Name
----------------
enable_list_1
DGS-3000-26TC:admin#
5-14

config authen application

Description
This command is used to configure login or enable method list for all or the specified application.
Format
config authen application [console | telnet | ssh | http | all] [login | enable] [default |
method_list_name <string 15>]
Parameters
console - Application: console.
telnet - Application: TELNET.
ssh - Application: SSH.
http - Application: web.
all - Application: console, TELNET, SSH, and web.
login - Selects the method list of authentication methods for user login.
enable - Selects the method list of authentication methods for promoting user's privilege to Admin
level.
default - Default method list.
method_list_name - The user-defined method list name.
<string> - Enter the method list name here. This value can be up to 15 characters long.
Restrictions
Only Administrators can issue this command.
Example
To configure the login method list for TELNET:
DGS-3000-26TC:admin#config authen application telnet login method_list_name
login_list_1
Command: config authen application telnet login method_list_name login_list_1
Success.
DGS-3000-26TC:admin#
Priority Method Name
-------- ---------------
1 tacacs+
2 tacacs
3 mix_1
4 local_enable
Comment
------------------
Built-in Group
Built-in Group
User-defined Group
Keyword
65