Config 802.1X Auth_Protocol; Config 802.1X Reauth - D-Link DGS-1100-06/ME Cli Reference Manual

Example usage:
To initialize the authentication state machine of all ports:
DGS-1100-06/ME:5#config 802.1x init port_based ports all
Command: config 802.1x init port_based ports all
Success.
DGS-1100-06/ME:5#

config 802.1x auth_protocol

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the RADIUS (AAA) authentication protocol on the Switch:
DGS-1100-06/ME:5#config 802.1x auth_protocol local
Command: config 802.1x auth_protocol local
Success!
DGS-1100-06/ME:5#

config 802.1x reauth

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure 802.1x reauthentication for ports 1-2:
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
To configure the 802.1x authentication protocol on the Switch .
config 802.1x auth_protocol [radius_eap | local]
The config 802.1x auth_protocol command enables configuration
of the authentication protocol.
radius_eap – Uses the list of RADIUS EAP servers for
authentication.
local – Uses no authentication.
Only Administrator or operator-level users can issue this command.
To configure the 802.1x re-authentication feature of the Switch.
config 802.1x reauth port_based ports [<portlist> | all]
The config 802.1x reauth command re-authenticates a previously
authenticated device based on port number.
port_based – Instructs the Switch to re-authorize 802.1x functions
based only on the port number. Ports approved for re-authorization
can then be specified.
ports <portlist> – A port or range of ports to be re-authorized.
all – Specifies all of the ports on the Switch.
Only Administrator or operator-level users can issue this command.
179