Traffic Segmentation Settings - D-Link DGS-1250 Series Reference Manual

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
ACL Name
Type
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.

Traffic Segmentation Settings

This window is used to display and configure the traffic segmentation settings. When the traffic segmentation
forwarding domain is specified, packets received by the port will be restricted in Layer 2 packet forwarding to
interfaces within the domain. When the forwarding domain of a port is empty, Layer 2 forwarding for packets received
by the port is not restricted.
The traffic segmentation member list can be comprised of different interface types, for example port and port-channel
in the same forwarding domain. If the interfaces specified by the command include a port-channel, all the member
ports of this port-channel will be included in the forwarding domain.
If the forwarding domain of an interface is empty, then there is no restriction on Layer 2 forwarding of packets received
by the port.
To view the following window, click Security > Traffic Segmentation Settings, as shown below:
The fields that can be configured are described below:
Parameter
From Port - To Port
From Forward Port ~ To
Forward Port
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove an entry based on the information entered.
Description
Enter the access class' name here. This name can be up to 32 characters long.
Select the trusted host type here. Options to choose from are Telnet, SSH, Ping,
HTTP, and HTTPS.
Figure 9-62 Traffic Segmentation Settings Window
Description
Select the receiving port range used for the configuration here.
Select the forward port range used for the configuration here.
216