Traffic Segmentation Settings; Storm Control - D-Link Dis-200G Series Web Ui Reference Manual

Traffic Segmentation Settings

This window is used to view and configure the traffic segmentation settings. When the traffic segmentation
forwarding domain is specified, packets received by the port will be restricted in Layer 2 packet forwarding
to interfaces within the domain. When the forwarding domain of a port is empty, Layer 2 forwarding for
packets received by the port is not restricted.
The traffic segmentation member list can be comprised of different interface types, for example port and
port-channel in the same forwarding domain. If the interfaces specified by the command include a port-
channel, all the member ports of this port-channel will be included in the forwarding domain.
If the forwarding domain of an interface is empty, then there is no restriction on Layer 2 forwarding of
packets received by the port.
To view the following window, click Security > Traffic Segmentation Settings, as shown below:
The fields that can be configured are described below:
Parameter
From Port / To Port
From Forward Port / To
Forward Port
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove an entry based on the information entered.

Storm Control

This window is used to view and configure the storm control settings.
To view the following window, click Security > Storm Control, as shown below:
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
Figure 8-8 Traffic Segmentation Settings window
Description
Select the receiving port range used for the configuration here.
Select the forward port range used for the configuration here.
Figure 8-9 Storm Control Settings window
93