Show Stp Ports; Config Stp Priority - D-Link DGS-3000 Reference Manual

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
56-12

show stp ports

Description
This command is used to show the port information includes parameters setting and operational
value.
Format
show stp ports {<portlist>}
Parameters
ports - Displays parameters of the designated port numbers, to be distinguished from showing
parameters of the bridge.
<portlist> - (Optional) Enter a list of ports used for the configuration here.
Restrictions
None.
Example
To show STP ports:
DGS-3000-26TC:admin#show stp ports
Command: show stp ports
MSTP Port Information
----------------------
Port Index : 1
External PathCost : Auto/200000
Port RestrictedRole : False,
Port Forward BPDU : Disabled
MSTI Designated Bridge
----- ------------------
0 N/A
CTRL+C ESC q Quit SPACE n
56-13

config stp priority

Description
This command is used to configure the instance priority.
Format
config stp priority <value 0-61440> instance_id <value 0-7>
, Hello Time: 2 /2 , Port STP : Enabled
, Edge Port : Auto /No , P2P : Auto /Yes
Port RestrictedTCN : False
Internal PathCost
-----------------
200000
Next Page p Previous Page
617
,
Prio Status Role
---- ---------- ----------
128 Forwarding NonStp
r Refresh