Config Stp Priority - D-Link DGS-3100 SERIES Cli Manual

config stp priority

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To set the priority value for instance_id 2 as 4096:
config stp mst_config_id
Purpose
Syntax
Description
Parameters
Restrictions
To update the STP instance configuration.
config stp priority <value 0-61440> instance_id <value 0-15>
The config stp priority command updates the STP instance
configuration settings on the Switch. The MSTP uses the priority in
selecting the root bridge, root port and designated port. Assigning
higher priorities to STP regions instructs the Switch to give
precedence to the selected instance_id for forwarding packets. A
lower value indicates a higher priority.
priority <value 0-61440> - The priority for a specified instance_id for
forwarding packets. The value may be between 0 and 61440, and
must be divisible by 4096. A lower value indicates a higher priority.
instance_id <value 0-15> - The value of the previously configured
instance id for which the user wishes to set the priority value. An
instance_id of 0 denotes the default instance_id (CIST) internally set
on the Switch.
Only administrator or operator-level users can issue this command.
DGS3100# config stp priority 4096 instance_id 2
Success.
DGS3100#
To update the MSTP configuration identification.
config stp mst_config_id [revision_level <int 0-65535> | name
<string>]
The config stp mst_config_id command uniquely identifies the
MSTP configuration currently configured on the Switch. Information
entered here is attached to BDPU packets as an identifier for the
MSTP region to which it belongs. Switches having the same
revision_level, name and identical vlans mapped for STP
instance_ids are considered to be part of the same MSTP region.
revision_level <int 0-65535>– The MSTP configuration revision
number. The value may be between 0 and 65535. This value, along
with the name and identical vlans mapped for STP instance_ids
identifies the MSTP region configured on the Switch. The default
setting is 0.
name <string> - A string of up to 32 alphanumeric characters to
uniquely identify the MSTP region on the Switch. This name, along
with the revision_level value and identical vlans mapped for STP
instance_ids identifies the MSTP region configured on the Switch. If
no name is entered, the default name is the MAC address of the
device.
Only administrator or operator-level users can issue this command.
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
68