Service Mode Screen Configuration - Canon iR6570 series Service Manual

16.1 Outline

16.1.1 Service mode screen configuration

As shown below, the service modes use three screen levels: initial screen -> main/intermediate item screen -> sub-item screen.
One set of modes are used for normal maintenance (Level 1 modes), and another set are used for troubleshooting (Level 2 modes).
(
Sub-item screen
(Level 1)
The copier has the 7 service modes listed below.
User screen
)(2,8)( )
Reset key
Initial screen
(Level 1)
(Select an item.)
Main/intermediate
item screen
(Level 1)
(Select a main item from the top of screen.)
(The corresponding intermediate items are
then displayed and can be selected.)
Sub-item screen
(Level 1)
Previous/next page
COPIER
FEEDER
SORTER
BOARD
Initial screen
( )(2) (Level 2)
(Select an item.)
Main/intermediate
item screen
(Level 2)
Sub-item screen
(Level 2)
F-16-1
DISPLAY Status display mode
I/O I/O display mode
ADJUST Adjustment mode
FUNCTION Operation/inspection mode
OPTION Specifications setting mode
TEST Test print mode
COUNTER Counter mode
F-16-2
(Select a main item from the top of screen.)
(The corresponding intermediate items are
then displayed and can be selected.)
Sub-item screen
(Level 2)
Previous/next page
Chapter 16
0009-5959
16-1