Interface; Lock-Port Mac-Aging - Huawei Quidway S2000 Series Command Manual

Command Manual - Port
Quidway S2000 Series Ethernet Switches

1.1.9 interface

Syntax
interface { interface_type interface_num | interface_name }
View
System view
Parameter
interface_type: Specifies the port type. For S2000 Series Ethernet Switches, it can
only be Ethernet.
interface_num: Specifies the port number. It adopts slot number/port number format.
For S2008/S2016 Ethernet Switches, Ethernet slot number ranges from 0 to 1. Slot 0
contains the fixed 100M Ethernet ports provided by the switch. S2008 Ethernet Switch
port number ranges from 1 to 10, while S2016 Ethernet Switch port number ranges
from 1 to 18. Slot 1 contains the extended 100M optical Ethernet port and the port
number can be 1 only.
For S2403H Ethernet Switch, Ethernet slot number ranges from 0 to 1. Slot 0 contains
the fixed 100M Ethernet ports provided by the switch and the port number ranges from
1 to 25. Slot 1 contains the extended 100M optical port. The port number can only be
1.
interface_name: Specifies the port name in the interface_name= interface_type
interface_num format.
Description
Using interface command, you can enter the Ethernet port view.
If the user wants to configure the related parameters of the Ethernet port, he must first
use this command to enter the Ethernet port view.
Example
# Enter the Ethernet0/1 port view.
[Quidway] interface ethernet0/1

1.1.10 lock-port mac-aging

Syntax
lock-port mac-aging { age-time | no-age }
undo lock-port mac-aging
Chapter 1 Ethernet Port Configuration Commands
1-8