Snmp-Agent Community - Huawei Quidway S2000 Series Command Manual

Command Manual - QoS/ACL
Quidway S2000 Series Ethernet Switches
Parameter
acl-number: Specifies a basic ACL with a number in the range of 2000 to 2999.
Description
Using ip http acl command, you can call an ACL and perform ACL control over the
WEB network management users. Using undo ip http acl command, you can cancel
the ACL control over the WEB network management users.
This command calls numbered basic ACL only.
Example
# Performs ACL control over the WEB network management users. (Suppose ACL
2020 has been defined.)
[Quidway] ip http acl 2020

3.1.3 snmp-agent community

Syntax
snmp-agent community { read | write } community-name [ [ mib-view view-name ] |
[ acl acl-number ] ]
undo snmp-agent community community-name
View
System view
Parameter
read: Indicate that MIB object can only be read.
write: Indicate that MIB object can be read and written.
community-name: Community name character string.
mib-view view-name: MIB view name.
acl acl-number: the number of basic ACL, ranging from 2000 to 2999.
Description
Using snmp-agent community command, you can configure the community name,
and perform the ACL control over the network management user through the
parameter acl acl-number. Using undo snmp-agent community command, you can
cancel the configuration of community name.
Chapter 3 Logon user's ACL control command
3-2