Display Ntp-Service Trace; Ntp-Service Access - Huawei Quidway S2000 Series Command Manual

Command Manual - System Management
Quidway S2000 Series Ethernet Switches
nominal frequency
actual frequency
clock precision
clock offset
root delay
root dispersion
peer dispersion
reference time

7.1.4 display ntp-service trace

Syntax
display ntp-service trace [ ip-address ]
View
Any view
Parameter
ip-address: Specify the IP address of the NTP server serving as the reference clock
source.
Description
Using display ntp-service trace command, you can display the brief information about
every NTP server on the way from the local equipment to the reference clock source.
Example
<Quidway> display ntp-service trace
server 127.0.0.1,stratum 8, offset 0.000000, synch distance 0.00000
refid 127.127.1.0

7.1.5 ntp-service access

Syntax
ntp-service access { query | synchronization | server | peer } acl-number
undo ntp-service access { query | synchronization | server | peer }
Output
Nominal frequency of the local system hardware clock
Actual frequency of the local system hardware clock.
Precision of local system clock
Offset of the local clock to the NTP server clock
Root delay from local equipment to the master reference clock.
Dispersion of the local clock relative to the NTP server clock
Dispersion of the remote NTP server.
Reference timestamp
Chapter 7 NTP Configuration Commands
Meaning
7-4