Rsa Local-Key-Pair Destroy - Huawei Quidway S2000 Series Command Manual

Command Manual - System Management
Quidway S2000 Series Ethernet Switches
Example
# Create local host key pair and server key pair.
[Quidway] rsa local-key-pair create
The key name will be: Quidway_Host
% You already have RSA keys defined for Quidway_Host
% Do you really want to replace them? [yes/no]:y
Choose the size of the key modulus in the range of 512 to 2048 for your Keys.
NOTES: If the key modulus is greater than 512,
It will take a few minutes.
How many bits in the modulus [512]:512
Generating keys...
.....++++++++++++
........................++++++++++++
..........++++++++
............................++++++++
[Quidway]

8.1.12 rsa local-key-pair destroy

Command
rsa local-key-pair destroy
View
System view
Parameter
None
Description
Using the rsa local-key-pair destroy command, you can remove all RSA key pairs at
the server, including Host key pair and Server key pair.
Acknowledgement information will be promoted before the system clears all RSA key
pairs. This command is just a one-time instruction, so the result will not be stored in the
configuration file.
For the related commands, see rsa local-key-pair create.
Chapter 8 SSH Configuration Commands
8-10