Huawei Quidway S2000 Series Command Manual page 149

Command Manual - Integrated Management
Quidway S2000 Series Ethernet Switches
Parameter
mac-address H-H-H: MAC address of candidate device.
verbose: Display the detailed information about the candidate device.
Description
Using display cluster candidates command, you can view candidate devices of the
cluster.
This command can only be performed on the administrator device.
The candidate devices are collected by NTDP. Execute hop command in System view
to specify the collection range.
This command displays the candidate device collected by NTDP last time. In order to
ensure the correctness of display, you can manually perform a collection first, or set the
NTDP to run collection periodically.
Example
# Display all the candidate devices lists.
<Quidway> display cluster candidates
MAC
00e0-fc10-0000
00e0-fc07-3c00
00e0-fc07-4de0
00e0-fc07-0bc0
# Display the information about the specified candidate device.
<Quidway> display cluster candidates mac-address 00e0-fc61-c4c0
Hostname
MAC
Hop
IP: 1.5.6.9/16
Platform
# Display the detailed information about all the candidate devices.
<Quidway> display cluster candidates verbose
Hostname
MAC
Hop
IP:
Platform
HOP IP
1
3
2 192.169.121.257/25 Quidway S3526
0
: LSW1
: 00e0-fc61-c4c0
: 1
: Quidway S3526
: Quidway
: 00e0-fc00-a01f
: 2
: Quidway S3026
Chapter 1 HGMP V2 Configuration Commands
PLATFORM
Quidway S3526
Quidway S3526
Quidway S3526
1-24