Chapter 3 Logon User's Acl Control Command; Logon User's Acl Control Command; Acl; Ip Http Acl - Huawei Quidway S2000 Series Command Manual

Command Manual - QoS/ACL
Quidway S2000 Series Ethernet Switches

Chapter 3 Logon user's ACL control command

3.1 Logon user's ACL control command

3.1.1 acl

Syntax
acl acl-number { inbound | outbound }
View
User-interface view
Parameter
acl-number: Specifies a basic ACL with a number in the range of 2000 to 2999.
inbound: Perform ACL control over the users that telnet to the local switch.
outbound: Perform ACL control over the users that telnet to other switches from the
local switch.
Description
Using acl command, you can call an ACL and perform ACL control over the TELNET
users.
This command calls numbered basic ACL only.
Example
# Performs ACL control over the users that telnet to the local switch. (Suppose ACL
2020 has been defined.)
[Quidway] user-interface vty 0 4
[Quidway-user-interface-vty0-4] acl 2020 inbound

3.1.2 ip http acl

Syntax
ip http acl acl-number
undo ip http acl
View
System view
Chapter 3 Logon user's ACL control command
3-1