Speed - Huawei Quidway S2000 Series Command Manual

Command Manual - Port
Quidway S2000 Series Ethernet Switches
Description
Using shutdown command, you can disable the Ethernet port. Using undo
shutdown command, you can enable the Ethernet port.
By default, the Ethernet port is enabled.
Example
# Enable Ethernet port Ethernet0/1.
[Quidway-Ethernet0/1] undo shutdown

1.1.26 speed

Syntax
speed { 10 | 100 | auto }
undo speed
View
Ethernet port view
Parameter
10: The speed on the port is 10Mbps.
100: The speed on the port is 100Mbps.
auto: The port speed is in peer auto-negotiation status.
Description
Using speed command, you can configure the port speed. Using undo speed
command, you can restore the default speed.
By default, the speed is auto.
For the related command, see duplex.
Example
# Configure Ethernet port Ethernet0/1 port speed as 10Mbps.
[Quidway-Ethernet0/1] speed 10
Chapter 1 Ethernet Port Configuration Commands
1-19