Command Manual - System Management
Quidway S2000 Series Ethernet Switches
4.5.11 info-center source
Syntax
info-center source { modu-name | default } channel { channel-number |
channel-name } [ { log | trap | debug } * { level severity | state state } * ]
undo info-center source { modu-name | default } channel { channel-number |
channel-name }
View
System view
Parameter
modu-name: Module name.
default: All the modules.
log: Log information.
trap: Trap information.
debugging: Debugging information.
level: Level.
severity: Information level, do not output information below this level. By default, the log
information level is warnings, the trap information level is debugging, the debugging
information level is debugging.
Information at different levels is as follows:
emergencies: Level 1 information, which cannot be used by the system.
alerts: Level 2 information, to be reacted immediately.
critical: Level 3 information, critical information.
errors: Level 4 information, error information.
warnings: level 5 information, warning information.
notifications: Level 6 information, showed normally and important.
informational: Level 7 information, notice to be recorded.
debugging: Level 8 information, generated during the debugging progress.
Chapter 4 System Maintenance Commands
4-30