Secondary Authentication; Server-Type - Huawei Quidway S2000 Series Command Manual

Command Manual - Security
Quidway S2000 Series Ethernet Switches

2.2.16 secondary authentication

Syntax
secondary authentication ip-address [ port-number ]
undo secondary authentication
View
RADIUS server group view
Parameter
ip-address: IP address, in dotted decimal format. By default, the IP addresses of
second authentication/authorization is at 0.0.0.0.
port-number: Specifies the UDP port number, ranging from 1 to 65535. By default, the
authentication/authorization service is provided via UDP 1812
Description
Using secondary authentication command, you can configure the IP address and
port number for the second RADIUS authentication/authorization. Using undo
secondary authentication command, you can restore the IP address and port number
to default values.
For detailed information, read the Description of the primary authentication
command.
For the related commands, see key, radius scheme, state.
Example
# Set the IP address of the second authentication/authorization server of RADIUS
server group, "huawei", to 10.110.1.2 and the UDP port 1812 to provide RADIUS
authentication/authorization service.
[Quidway-radius-huawei] secondary authentication 10.110.1.2 1812

2.2.17 server-type

Syntax
server-type { huawei | iphotel | portal | standard }
undo server-type
View
RADIUS server group view
Chapter 2 AAA Configuration Commands
2-29