Display Cluster - Huawei Quidway S2000 Series Command Manual

Command Manual - Integrated Management
Quidway S2000 Series Ethernet Switches

1.3.9 display cluster

Syntax
display cluster
View
Any view
Parameter
none
Description
Using display cluster command, you can view the state and basic configuration
information of the cluster.
This command can be performed on both administrator device and member device, but
the displays are different. In the administrator device, there are cluster name, member
number, handshake interval, holdtime, address pool, and the server of cluster. In the
member device, there are member number, MAC address of administrator device, and
the state of administrator device.
Example
# Display information about cluster on the administrator device.
<Quidway> display cluster
Cluster name:"sss"
Role:Administrator
Handshake timer:10 sec
Handshake hold-time:60 sec
IP-Pool:1.1.1.1/20
No logging host configured
No SNMP host configured
No FTP server configured
No TFTP server configured
Chapter 1 HGMP V2 Configuration Commands
.
1-22