Display Gvrp Status; Gvrp - Huawei Quidway S2000 Series Command Manual

Command Manual - VLAN
Quidway S2000 Series Ethernet Switches

3.2.2 display gvrp status

Syntax
display gvrp status
View
Any view
Parameter
none
Description
Using display gvrp status command, you can view the global status information
about GVRP.
Example
# Display the global status information about GVRP.
<Quidway> display gvrp status
GVRP is enabled

3.2.3 gvrp

Syntax
gvrp
undo gvrp
View
System view/Ethernet port view
Parameter
none
Description
Using gvrp command, you can enable GVRP. Using undo gvrp command, you can
restore the GVRP to default mode, i.e. disable GVRP.
By default, GVRP is disabled.
This command can be used to enable/disable global GVRP in System view or
enable/disable port GVRP in Ethernet port view.
Before enabling port GVRP, the user must enable global GVRP first and port GVRP
must be enabled/disabled on Trunk port.
Chapter 3 GARP/GVRP Configuration Commands
3-6