Log Commands; Display Channel - Huawei Quidway S2000 Series Command Manual

Command Manual - System Management
Quidway S2000 Series Ethernet Switches
10 129.140.81.7 (129.140.81.7) 199 ms 180 ms 300 ms
11 129.140.72.17 (129.140.72.17) 300 ms 239 ms 239 ms
12 * * *
13 128.121.54.72 (128.121.54.72) 259 ms 499 ms 279 ms
14 * * *
15 * * *
16 * * *
17 * * *
18 ALLSPICE.LCS.MIT.EDU (18.26.0.115) 339 ms 279 ms 279 ms

4.5 Log Commands

4.5.1 display channel

Syntax
display channel [ channel-number | channel-name ]
View
Any view
Parameter
channel-number: Channel number, ranging from 0 to 9, that is, the system has ten
channels.
channel-name: Specify the channel name. the name can be channel6, channel7,
channel8,
trapbuffer.
Description
Using display channel command, you can view the details about the information
channel.
Without parameter, display channel command shows the configurations of all the
channels.
Example
# Show details about the information channel 0.
<Quidway> display channel 0
channel number:0, channel name:console
channel9, console,
Chapter 4 System Maintenance Commands
logbuffer, loghost,
4-21
monitor, snmpagent,