Port - Huawei Quidway S2000 Series Command Manual

Command Manual - VLAN
Quidway S2000 Series Ethernet Switches
static: Display information of VLAN created statically by the system.
dynamic: Display information of VLAN created dynamically by the system.
Description
Using display vlan command, you can view related information about the specified or
all VLANs.
If vlan_id or all is specified, information of specified VLAN or all VLANs is displayed. It
includes: VLAN ID, VLAN state, whether the routing function has been enable on this
VLAN (i.e. whether the route interface exists. If it exists, display IP address and mask),
VLAN description, and the ports VLAN contains.
If parameter is not specified, information of the VLAN that has been created and
information of whether VLAN feature has been enabled are displayed. If the parameter
dynamic or static is selected, information of VLAN created dynamically or statically by
the system and information of whether VLAN feature has been enabled are displayed.
For the related command, see vlan.
Example
# Display the information about VLAN1.
[Quidway] display vlan 1
VLAN ID: 1
VLAN Type: static
Route interface: not configured
Description: HUAWEI
Tagged
Untagged Ports:
Ethernet0/1 Ethernet0/2 Ethernet0/3

1.1.3 port

Syntax
port interface_list
undo port interface_list
View
VLAN view
Parameter
interface_list: list of Ethernet ports to be added to or deleted from a certain VLAN,
expressed as interface_list= {{ interface_type interface_num | interface_name } [ to
{ interface_type interface_num | interface_name } ] }&<1-10>.
interface type, interface_numis interface number and interface_name is interface
Ports: none
Chapter 1 VLAN Configuration Commands
1-2
interface_type is