Ntdp Configuration Commands; Display Ntdp - Huawei Quidway S2000 Series Command Manual

Command Manual - Integrated Management
Quidway S2000 Series Ethernet Switches
interface_name } [ to { interface_type interface_num | interface_name } ] } &<1-10>.
interface_type specifies the port type. interface_num specifies the port number,
expressed as slot number/port number. Key word to helps specify a port range.
Description
Using reset ndp statistics command, you can reset the NDP counters to clear the
NDP statistics information.
Example
# Clear NDP statistics information.
<Quidway> reset ndp statistics

1.2 NTDP Configuration Commands

1.2.1 display ntdp

Syntax
display ntdp
View
Any view
Parameter
none
Description
Using display ntdp command, you can view the global NTDP information. The
displayed information includes collected hops, ntdp timer, hop-delay, port-delay and
time taken for last collection.
This command is used for displaying the global NTDP information.
Example
# Display the global NTDP information.
[Quidway] display ntdp
NTDP is running.
Hops : 3
Chapter 1 HGMP V2 Configuration Commands
1-7