Gvrp Configuration Command; Display Gvrp Statistics - Huawei Quidway S2000 Series Command Manual

Command Manual - VLAN
Quidway S2000 Series Ethernet Switches
command has no parameter, it will clear the GARP statistics information of all the
ports.
For the related command, see display garp statistics.
Example
# Clear GARP statistics information.
<Quidway> reset garp statistics

3.2 GVRP Configuration Command

3.2.1 display gvrp statistics

Syntax
display gvrp statistics [ interface interface_list ]
View
Any view
Parameter
interface_list: List of Ethernet port to be displayed, expressed as interface _list =
{ { interface_type interface_num | interface_name } [ to { interface_type interface_num
| interface_name } ] }&<1-10>. interface_type is interface type, interface_num is
interface number and interface_name is interface name. For their meanings and value
range, read command parameters description of "Port" in this document.
&<1-10>: Representing the repeatable times of parameters, 1 is the minimal and 10 is
the maximal.
Description
Using display gvrp statistics command, you can view the GVRP statistics
information of all the Trunk ports, including the list of ports enabled with GVRP, GVRP
status information, failed GVRP registration entries and the last GVRP data unit origin
etc.
Example
# Display the GVRP statistics information about Ethernet0/1.
<Quidway> display gvrp statistics interface ethernet0/1
GVRP statistics on port Ethernet0/1
GVRP Status
GVRP Failed Registrations
GVRP Last Pdu Origin
GVRP Registration Type
3-5
Chapter 3 GARP/GVRP Configuration Commands
: Enabled
: 0
: 0000-0000-0000
: Normal