Interface Vlan-Interface - Huawei Quidway S2000 Series Command Manual

Command Manual - Getting Started
Quidway S2000 Series Ethernet Switches
Example
# Display the verbose routing table information.
<Quidway> display ip routing-table verbose
Routing Tables:
Generate Default: no
+ = Active Route, - = Last Active, # = Both
Destinations: 3
Holddown: 0
**Destination: 1.1.1.0
**Destination: 1.1.1.1
**Destination: 2.2.2.0
First, display statistics of the whole routing table and then output detailed information
of every route entry in turn. The meaning of route status is shown in Table 2-5, and the
statistics of routing table is shown in the following table.
Table 2-6 Description of information generated by the command display ip routing-table verbose
Field
Holddown
Delete
Hidden

2.1.9 interface vlan-interface

Syntax
interface vlan-interface vlan-id
undo interface vlan-interface vlan-id
Routes: 3
Delete: 62
Protocol: #DIRECT
*NextHop: 1.1.1.1
State: <Int ActiveU Retain Unicast>
Age: 20:17:41 Cost: 0/0
Protocol: #DIRECT
*NextHop: 127.0.0.1
State: <NoAdvise Int ActiveU Retain Gateway Unicast>
Age: 20:17:42 Cost: 0/0
Protocol: #DIRECT
*NextHop: 2.2.2.1
State: <Int ActiveU Retain Unicast>
Age: 20:08:05 Cost: 0/0
Number of held-down routes
Number of deleted routes
Number of hidden routes
Chapter 2 System IP Configuration Commands
* = Next hop in use
Hidden: 0
Mask: 255.255.255.0
Preference: 0
Interface: 1.1.1.1(Vlan-interface1)
Mask: 255.255.255.255
Preference: 0
Interface: 127.0.0.1(InLoopBack0)
Mask: 255.255.255.0
Preference: 0
Interface: 2.2.2.1(Vlan-interface2)
Description
2-10