User-Name-Format - Huawei Quidway S2000 Series Command Manual

Command Manual - Security
Quidway S2000 Series Ethernet Switches
Table 2-1 Recommended ratio of minute to number of users
1 to 99
100 to 499
500 to 999
≥1000
For the related commands, see retry realtime-accounting , radius scheme.
Example
# Set the real-time accounting interval of RADIUS server group, "huawei", to 15
minutes.
[Quidway-radius-huawei] timer realtime-accounting 15

2.2.22 user-name-format

Syntax
user-name-format { with-domain | without-domain }
View
RADIUS server group view
Parameter
with-domain: Specifies to send the username with domain name to RADIUS server.
without-domain: Specifies to send the username without domain name to RADIUS
server.
Description
Using user-name-format command, you can configure the username format sent to
RADIUS server.
By default, RADIUS server acknowledges that the username sent to it includes ISP
domain name.
The supplicants are generally named in userid@isp-name format. The part following
"@" is the ISP domain name. The switch will put the users into certain ISP domains
according to the domain names. However, some earlier RADIUS servers reject the
username including ISP domain name. In this case, the username will be sent to the
RADIUS server after its domain name is removed. Accordingly, the switch provides this
command to decide whether the username to be sent to RADIUS server carries ISP
domain name or not.
Number of users
Chapter 2 AAA Configuration Commands
Real-time accounting interval (minute)
3
6
12
≥15
2-34