Put - Huawei Quidway S2000 Series Command Manual

Command Manual - System Management
Quidway S2000 Series Ethernet Switches
Parameter
none
Description
Using passive command, you can configure the data transmission mode as passive
mode. Using undo passive command, you can configure the data transmission mode
as active mode.
By default, the data transmission mode is passive mode
Example
# Set the data transmission to passive mode.
[ftp] passive

1.4.16 put

Syntax
put localfile [ remotefile ]
View
FTP Client view
Parameter
localfile: Local file name.
remotefile: File name on the remote FTP Server.
Description
Using put command, you can upload a local file to the remote FTP Server.
If the user does not specify the filename on the remote server, the system will consider
it the same as the local file name by default.
Example
# Upload the local file temp.c to the remote FTP Server and saves it as temp1.c.
[ftp] put temp.c temp1.c
Chapter 1 File System Management Commands
1-29