Rmon Event - Huawei Quidway S2000 Series Command Manual

Command Manual - System Management
Quidway S2000 Series Ethernet Switches

6.1.8 rmon event

Syntax
rmon event event-entry [ description string ] { log | trap trap-community | log-trap
log-trapcommunity | none } [ owner rmon-station ]
undo rmon event event-entry
View
System view
Parameter
event-entry: Number of the entry to be added/deleted, ranging from 1 to 65535.
description string: Event description. Length of the character string ranges from 1 to
255.
log: Log event.
trap: Trap event.
trap-community: Name of the community that trap message is sent to.
log-trap: Log and trap event.
log-trapcommunity: Name of the community that trap message is sent to.
none: neither log nor trap event.
owner rmon-station: Name of the network management station that creates this entry.
The length of the character string ranges from 1 to 127.
Description
Using rmon event command, you can add an entry to the event table. Using undo
rmon event command, you can cancel an entry from this table.
Event management of RMON defines the way to deal with event number and event-log,
send trap message or log while sending trap message. In this way, alarm events may
obtain corresponding treatment
Example
# Add the entry 10 to the event table and marks it as log event.
[Quidway] rmon event 10 log
Chapter 6 RMON Configuration Commands
6-9