Domain - Huawei Quidway S2000 Series Command Manual

Command Manual - Security
Quidway S2000 Series Ethernet Switches
Description
Using display local-user command, you can view the relevant information of all the
local users or the specified one(s).
This command displays the relevant information about a specified or all the local users.
The output can help you with the fault diagnosis and troubleshooting related to local
user.
For the related command, see local-user.
Example
# Display the relevant information of all the local users.
<Quidway> display local-user
The contents of local user user1:
State:
Idle Cut:
AccessLimit:
Bind location:
Vlan ID:
IP address:
MAC address:
Total 1 local user(s) Matched,1 listed.

2.1.7 domain

Syntax
domain [ isp-name | default { disable | enable isp-name } ]
undo domain isp-name
View
System view
Parameter
isp-name: Specifies an ISP domain name. The name is expressed with a character
string not exceeding 24 characters, excluding "/", ": ", "*", "? ", "<", and ">".
default: configure default ISP.
disable: Disable default ISP configuration.
enable: Enable default ISP configuration.
Active ServiceType Mask: None
Disable
Disable Current AccessNum: 0
Disable
Disable
Disable
Disable
2-7
Chapter 2 AAA Configuration Commands