Tcp Timer Syn-Timeout - Huawei Quidway S2000 Series Command Manual

Command Manual - Network Protocol
Quidway S2000 Series Ethernet Switches
Parameter
time-value: TCP finwait timer value in second, with the value ranging from 76 to 3600;
By default, 675 seconds.
Description
Using tcp timer fin-timeout command, you can configure the TCP finwait timer. Using
undo tcp timer fin-timeout command, you can restore the default value of the TCP
finwait timer.
When the TCP connection state changes from FIN_WATI_1 to FIN_WAIT_2, the finwait
timer is enabled. If the switch does not receive FIN packet before finwait timer timeouts,
the TCP connection will be terminated.
For the related command, see tcp timer syn-timeout, tcp window.
Example
# Configure the TCP finwait timer value as 800 seconds.
[Quidway] tcp timer fin-timeout 800

3.1.7 tcp timer syn-timeout

Syntax
tcp timer syn-timeout time-value
undo tcp timer syn-timeout
View
System view
Parameter
time-value: TCP synwait timer value measured in second, whose value ranges from 2
to 600. The default time-value is75 seconds.
Description
Using tcp timer syn-timeout command, you can configure the TCP synwait timer.
Using undo tcp timer syn-timeout command, you can restore the default value of the
timer.
Chapter 3 IP Performance Configuration Commands
3-6