Command Manual - Security
Quidway S2000 Series Ethernet Switches
[Quidway] dot1x timer handshake-period 200
1.1.13 reset dot1x statistics
Syntax
reset dot1x statistics [ interface interface-list ]
View
User view
Parameter
interface interface-list: Ethernet port list including several Ethernet ports. interface-list
= { interface-num [ to interface-num ] } & < 1-10 >. interface-num specifies a single
Ethernet port in the format port-num = { interface-type interface-num | interface-name },
where interface-type specifies the port type, interface-num specifies the port number
and interface-name specifies the port name. For the respective meanings and value
ranges, read the Parameter of the Port Configuration section.
Description
Using reset dot1x statistics command, you can reset the statistics information of
802.1x.
This command can be used to re-perform information statistics if the user wants to
delete the former statistics information of 802.1x.
When the original statistics information is cleared, if no port type or port number is
specified, the global 802.1x statistics information of the switch and 802.1x statistics
information on all the ports will be cleared. If the port type and port number are
specified, the 802.1x statistics information on the specified port will be cleared.
For the related commands, see display dot1x.
Example
# Clear the 802.1x statistics information on Ethernet 0/1.
<Quidway> reset dot1x statistics interface Ethernet 0/1
Chapter 1 802.1x Configuration Commands
1-13