Huawei Quidway S2000 Series Command Manual page 195

Command Manual - Security
Quidway S2000 Series Ethernet Switches
undo attribute { ip | mac | idle-cut | access-limit | vlan | location }*
View
Local user view
Parameter
ip: Specifies the IP address of a user.
mac mac-address: Specifies the MAC address of a user. Where, mac-address takes
on the hexadecimal format of X-X-X.
idle-cut second: Allows/Disallows the local users to enable the idle-cut function. (The
specific data for this function depends on the configuration of the ISP domain where the
users locate.) The argument minute defines the idle-cut time, which is in the range of 60
to 7200 seconds.
access-limit max-user-number: Defines the maximum number of users that the
current ISP domain can accommodate. The argument max-user-number is in the range
of 1 to 512.
vlan vlanid: Sets the VLAN attribute of user, in other words, the VLAN to which a user
belong. The argument vlanid is an integer in the range of 1 to 4094.
location: Sets the port binding attribute of user.
nas-ip ip-address: The IP address of the access server in the event of binding a remote
port with a user. The argument ip-address is an IP address in dotted decimal format
and defaults to 127.0.0.1.
port portnum: Sets the port with which a user is bound. The argument portnum is
represented by "SlotNumber SubSlotNumber PortNumber". If any of these three items
is absent, the value 0 can be used to replace it.
Description
Using attribute command, you can configure some attributes for specified local user.
Using undo attribute command, you can cancel the attributes that have been defined
for this local user.
It should be noted that the argument nas-ip must be defined for a user bound with a
remote port, which is unnecessary, however, in the event of a user bound with a local
port.
For the related command, see display local-user.
Example
# Configure the IP address 10.110.50.1 to the user huawei1.
[Quidway-luser-huawei1] attribute ip 10.110.50.1
Chapter 2 AAA Configuration Commands
2-2