Display Radius - Huawei Quidway S2000 Series Command Manual

Command Manual - Security
Quidway S2000 Series Ethernet Switches

2.2.3 display radius

Syntax
display radius [ radius-server-name ]
View
Any view
Parameter
radius-server-name: Specifies the RADIUS server group name with a character string
not exceeding 32 characters, excluding "/", ":", "*", "?", "<" and ">". Display all RADIUS
server groups when the parameter is not set.
Description
Using display radius command, you can view the configuration information of all
RADIUS server groups or a specified one.
By default, This command outputs the configuration information about the specified or
all the RADIUS server groups. The output can help with RADIUS diagnosis and
troubleshooting.
For the related command, see radius scheme.
Example
# Display the configuration information of all the RADIUS server groups.
<Quidway> display radius
------------------------------------------------------------------
SchemeName
Primary Auth IP
Primary Acct IP
Second
Second
Auth Server Encryption Key= huawei
Acct Server Encryption Key= huawei
TimeOutValue(in second)=3 RetryTimes=3 RealtimeACCT(in minute)=12
Permitted send realtime PKT failed counts
Retry sending times of noresponse acct-stop-PKT =500
Username format
Data flow unit
Packet unit
------------------------------------------------------------------
Printed [1]items
=system
=127.0.0.1
=127.0.0.1
Auth IP =0.0.0.0
Acct IP =0.0.0.0
Chapter 2 AAA Configuration Commands
Index=0
Port=1645 State=active
Port=1646 State=active
Port=1812 State=block
Port=1813 State=block
=5
=without-domain
=Byte
=1
2-16
Type=huawei