Huawei Quidway S2000 Series Command Manual page 342

Command Manual - System Management
Quidway S2000 Series Ethernet Switches
mib-view: Specify the mib view name.
Description
display snmp-agent mib-view command is used to view the MIB view configuration
information of the Ethernet switch.
Example
# Display the information about the currently configured MIB view.
<Quidway> display snmp-agent mib-view
View name:mv
Storage-type: nonVolatile
View name:test
Storage-type: nonVolatile
View name:ViewDefault
Storage-type: nonVolatile
View name:ViewDefault
Storage-type: nonVolatile
View name:ViewDefault
Storage-type: nonVolatile
View name:ViewDefault
Storage-type: nonVolatile
The following table describes the output fields.
Table 5-2 Output description of the display snmp-agent mib-view command
View name
MIB Subtree
storage-type
included/excluded
active
MIB Subtree:internet
-included active
MIB Subtree:internet
-included active
MIB Subtree:internet
-included active
MIB Subtree:snmpUsmMIB
-excluded active
MIB Subtree:snmpVacmMIB
-excluded active
MIB Subtree:snmpModules.18
-excluded active
Field
View name
MIB subtree
Storage type
Permit or forbid access to an MIB object
Indicate the line state in the table
5-4
Chapter 5 SNMP Configuration Commands
Description