Display Rmon Event - Huawei Quidway S2000 Series Command Manual

Command Manual - System Management
Quidway S2000 Series Ethernet Switches
Samples absolute value
Sampling interval
Rising threshold
Falling threshold
startup
risingOrFallingAlarm

6.1.2 display rmon event

Syntax
display rmon event [ event-table-entry ]
View
Any view
Parameter
event-table-entry: Entry index of event table.
Description
Using display rmon event command, you can view RMON events.
The display includes event index in event table, owner of the event, description to the
event, action caused by event (log or alarm information), and occurrence time of the
latest event (counted on system initiate/boot time in centiseconds).
For the related commands, see rmon event.
Example
# Show the RMON event.
<Quidway> display rmon event
Event table 1 owned by HUAWEI is VALID.
Description: null.
Will cause log-trap when triggered, last triggered at 0days 00h:02m:27s.
Table 6-2 Output description of the display rmon event command
Event table 1
Field
Sampling the absolute value of the node 1.3.6.1.2.1.16.1.1.1.4.1
The interval of sampling the value
Rising threshold. When sampling value rises from normal value to this threshold, rising
threshold alarm will be triggered.
Falling threshold. When sampling value decreases from normal value to this threshold,
falling threshold alarm will be triggered.
The first trigger
The type of the first alarm: Specifies to alarm when exceeding the rising threshold or the
falling threshold
Field
Chapter 6 RMON Configuration Commands
Description
Index 1 in event table
6-2
Description