Ftp Client Commands; Ascii - Huawei Quidway S2000 Series Command Manual

Command Manual - System Management
Quidway S2000 Series Ethernet Switches
View
Local user view
Parameter
telnet: Specifies user type as Telnet.
level level: Specifies the level of Telnet users. The argument level is an integer in the
range of 0 to 3 and defaults to 3.
ftp: Specifies user type as ftp.
ftp-directory directory: Specifies the directory of ftp users, directory is a character
string of up to 64 characters.
lan-access: Specifies user type to lan-access, which mainly refers to Ethernet
accessing users, 802.1x supplicants for example.
Description
Using service-type command, you can configure a service type for a particular user.
Using undo service-type command, you can cancel the specified service type for the
user.
Example
# Set to provide the lan-access service for the user huawei1.
[Quidway-user-huawei1] service-type lan-access

1.4 FTP Client Commands

1.4.1 ascii

Syntax
ascii
View
FTP Client view
Parameter
none
Chapter 1 File System Management Commands
1-20