Display Tcp Status - Huawei Quidway S2000 Series Command Manual

Command Manual - Network Protocol
Quidway S2000 Series Ethernet Switches
bad protocol
bad format
bad checksum
bad options
Output: forwarding
local
dropped
no route
compress fails
Fragment: input
output
dropped
fragmented
couldn't fragment
Reassembling: sum
timeouts

3.1.4 display tcp status

Syntax
display tcp status
View
Any view
Parameter
none
Description
Using display tcp status command, you can view the TCP connection state.
Example
# Display the state of all TCP connections.
<Quidway> display tcp status
TCPCB
03e37dc4 0.0.0.0:4001
04217174 100.0.0.204:23
description of the display tcp status display
Field
Number of packets with wrong protocol number
Number of packets in bad format
Number of packets with wrong checksum
Number of packets that has wrong options
Number of forwarded packets
Number of packets that are sent by the local device
Number of dropped packets during transmission
Number of packets that cannot be routed
Number of packets that cannot be compressed
Number of input fragments
Number of output fragments
Number of dropped fragments
Number of packets that are fragmented
Number of packets that cannot be fragmented
Number of packets that are reassembled
Number of packets that time out
Local Add:port
Chapter 3 IP Performance Configuration Commands
Description
Foreign Add:port
0.0.0.0:0
100.0.0.253:65508
3-4
State
Listening
Output
Established