Huawei Quidway S2000 Series Command Manual page 349

Command Manual - System Management
Quidway S2000 Series Ethernet Switches
View
System view
Parameter
groupname: Group name, ranging from 1 to 32 bytes.
authentication: Configure to authenticate the packet without encryption.
privacy: Configure to authenticate and encrypt the packet.
read-view: Configures to allow read-only view settings.
readview: Read-only view name, ranging from 1 to 32 bytes.
write-view: Configure to allow read-write view settings.
writeview: Name of read-write view, ranging from 1 to 32 bytes.
notify-view: Configure to allow notify view settings.
notifyview: Specify the notify view name, ranging from 1 to 32 bytes.
acl acl-list:Set access control list for this group name.
Description
Using snmp-agent group command, you can configure a new SNMP group, that is, to
map SNMP user to SNMP view. Using undo snmp-agent group command, you can
cancel a specified SNMP group.
For the following reasons:
snmp-agent target-host command automatically generates a notifyview for user
and adds it to the corresponding group.
Any change of the SNMP group notify view will affect all the users related to this
group.
Please do not specify the notify view when configuring SNMP group.
Example
# Create an SNMP group named huawei.
[Quidway] snmp-agent group v3 huawei.
Chapter 5 SNMP Configuration Commands
5-11